Includes:

• Filter Housing
• 5 Micron Pleated Filter Cartridge
• 3/4″ Outlet Hose Connector Fitting
• Valve Connector
• Housing Wrench

Available in 3 sizes:

• Size 6, 2.5″ x 10″
• Size 14, 4.5″ x 10″
• Size 22, 4.5″ x 20″

Technical Data:

• Water Temperature Range: 40°F – 100°F (4.4°C – 37.7°C)
• Preferred pH Range: 6.0-8.5
• Max Pressure: 75 psi (5.17 bar)
• Housings: NSF/ANSI Standard 42 Certified for material and structural integrity requirements only
• Media: WQA Certified to meet NSF/ANSI Standard for drinking water applications

This single system is the perfect add-on for the Metaltrap Ultra Dual Filter System for RV’s and homes, especially if your water source is loaded with sediment or particles. Sediment in the line can reduce pressure, slow the flow down and even clog your more expensive media cartridges. Using our Pre-Filter prior to the Ultra cartridge extends the life and reduces your chance of clogging it with unnecessary sediments. Our pleated cartridge is long-lasting and can be rinsed off for use again and again!

Keep in mind, with creativity, you can mix and match sizes of Pre-Filters that suits your needs. For example, you can get a Size 6 Pre-Filter even though you have a Dual System 22. You would just need to use flexible hose to connect to adjust for the heights, or adjust the height manually for a permanent mounted position.

CAUTION: Filter housing must be protected against freezing and extreme temperatures. Filter housings should not be in direct contact with sunlight for a prolonged period of time since UV rays can make housings brittle. Failure to the above may result in cracking of filter housing, water leakage, and water damage.