(1 customer review)


Why just TREAT METALS when you can TRAP THEM!!

Real solutions for bad water!

  • Prevents Stains – Provides Clear Water
  • Removes Metals Like Iron & Copper from Fill Water
  • Effective on Both City & Well Water
  • Quick Hose Connect or Install In-Line 
  • Disposable & Easy to Use
  • Available in 3 sizes: Estimated 6,000/14,000/22,000 US gallon capacity*
SKU: MT-DS Categories:


  • 2 Filter Housings
  • 1 METALTRAP Media Filter Cartridge
  • 1 5 Micron Pleated Filter Cartridge
  • 3/4″ Fittings:  Inlet Valve Connector*, Outlet Hose Connector*, Housing Connector
  • Housing Wrench

*Inlet/Outlet: female NPT ports


Available in 3 sizes: Estimated 6,000/14,000/22,000 US gallon capacity*

(*based on 1 ppm iron content)


Technical Data:

  • Water Temperature Range: 40°F – 100°F (4.4°C – 37.7°C)
  • Preferred pH Range: 6.0-8.5
  • Max Pressure: 75 psi (5.17 bar)
  • Housings: NSF/ANSI Standard 42 Certified for material and structural integrity requirements only
  • Media: WQA Certified to meet NSF/ANSI Standard for drinking water applications


With the METALTRAP Pre-Filter System, now you can protect your pool/spa from the unsightly brown, green, and gray stains caused by metals like iron and copper. The METALTRAP for pools/spas traps the metals before they reach your pool/spa and is safe and effective, even on the toughest waters found in problem wells.


METALTRAP is a combination of filtration media materials that work together to give you superior metal removal. This synergistic media technology doesn’t just treat water – it chemically reacts with the metals and then physically traps them, removing them permanently from the water!


With METALTRAP, you can remove even the toughest metals and contaminants found in the worst well water. Our technology is specifically designed to remove copper, iron, and other problematic metals from your water supply. It is also very effective on removing hydrogen sulfide, responsible for the rotten egg smell. No matter what your project is or where your water is coming from, METALTRAP will work hard to get you the best results.


Regular carbon filters are NOT enough! The METALTRAP filters at a submicron level, trapping metals the other filters can’t. At Hydropure Technologies, our goal is to provide you with the best tools on the market to help you achieve an absolutely 100% metal free pool and spa.


CAUTION: Filter housing must be protected against freezing and extreme temperatures. Filter housings should not be in direct contact with sunlight for a prolonged period of time since UV rays can make housings brittle. Failure to do so may result in cracking of filter housing, water leakage, and water damage.


For Installation Directions: MT-DS-AF Installation


Additional information
METALTRAP Pre-Filter System

up to 6,000 gallons ($179.99), up to 14,000 gallons ($279.99), up to 22,000 gallons ($399.99)

1 review for METALTRAP Pre-Filter System
  1. Chris Fisher (verified owner)

    Solid construction. Easy Instructions. A bit pricey but you get what you pay for. Hopefully this cures my copper issue in my pool water.

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *