Need Help? Check out our Resources or Helpful Links on the menu!
Flat rate shipping on all orders within continental US

$24.99$32.99

0 review  |  Write a review

2 sizes available:  10″ and 20″ Length (approximate capacity: 10,000/20,000 gallons)

  • Quick Hose Connect
  • Extra Large Capacity
  • Protects Your Pool Finish on Every Fill
Clear
SKU: 1M Category:

2 sizes available:  10″ and 20″ Length (approximate capacity: 10,000/20,000 gallons)

  • Quick Hose Connect
  • Extra Large Capacity
  • Protects Your Pool Finish on Every Fill

The Hydropure 1-MICRON Sediment/Bacteria Filter is a unique polymer spun-wound cartridge filter that removes water contaminants that are 1 micron or larger in size. Unlike media filters, the 1-MICRON acts as a physical barrier, trapping a large variety of contaminants in its many layers. This includes rust, sand, allergens, human hair, and other harmful pollutants prevalent today.

Our 1-MICRON Filter technology is unique in that it has multiple layers of filtration. Each layer of our spun-wound fibers can provide a different degree of filtration. While the outside layers start removing contaminants at 30 microns, the inner-most layers can remove even the finest particles as small as 1 micron. That’s 1/10th the size of every day pollen! The Hydropure design allows you to get the most out of your filter. It prevents premature clogging, which means you’ll be replacing our 1-MICRON Filter less often.

Occasionally, you may encounter areas where the water is filled with large sediment particles, like dirt or debris. These larger particles would clog typical filters, causing you to just throw them away. With the Hydropure 1-MICRON’s unique layers, you can simply rinse it off and re-use it again and again.

 

List of Contaminants Removed by the 1-Micron Pre-Filter
Oxidized Iron & Copper*DustUn-dissolved Minerals
PollenDirtCryptosporidium
HairSedimentGiardia
AlgaeSiltBacteria
MoldSandOils
CystsInsecticidesScum
…and much, much MORE!

 

*CAUTION: This filter does not remove dissolved metals. For high metal levels, use the METALTRAP™ Filter.

For Filter Label and Complete Directions, click here: 1 Micron

Additional information

One Micron Hose Filters:

10" (up to 10,000 gallons)($24.99), 20" (up to 20,000 gallons)($32.99)

Reviews

There are no reviews yet.

Be the first to review “1 MICRON PRE-FILTER (available in 2 sizes)”

Your email address will not be published. Required fields are marked *