Posted at 13:18h
in
Ask The Expert Typically, a reduced flow is an indicator that it’s time to change your filter. Once the filter cartridge is loaded with contaminants, the flow of water will naturally start to decrease. If you have a dual system, you’ll need to determine which of the two...
Posted at 13:13h
in
Ask The Expert The first step is to determine whether the flow is being restricted by the filter itself or by some other cause in the water line. Temporarily disconnect the water filter system and check the flow again. The next step is to double-check the installation of...
Posted at 16:19h
in
Ask The Expert Metals like iron and copper can be a real pain!! Here are some helpful things you need to know to live happily ever after with iron:1. A little bit of iron can cause A LOT of trouble!! It only takes 0.3 ppm of iron to...
Posted at 15:13h
in
Ask The Expert We get the calls all the time. Homeowners so frustrated with all the time and money they've wasted doing stain treatment after stain treatment after stain treatment. The big question is "Why do these stains keep coming back?" The answer really is simple. Because the...
Posted at 22:05h
in
Ask The Expert The first step would be to double-check the proper alignment of the cartridges within the filter housings. It is very important that the METALTRAP cartridge be aligned properly within the housing so the water flows directly through the center hole on the top of the...
Posted at 21:52h
in
Ask The Expert The first step is to isolate the leak to determine exactly where it is coming from. Double-check all fitting joints are securely tightened. Keep in mind that Teflon tape needs to be replaced periodically to ensure a tightly sealed connection. Double-check the black O-ring is...